FM25Q02
The FM25Q02 is a 2M-bit (256K-byte) Serial Flash memory, with advanced write protection mechanisms. The FM25Q02 supports the standard Serial Peripheral Interface (SPI),Dual/Quad IO as well as 2-clock instruction cycle Quad Peripheral Interface (QPI). They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI(XIP) and storing voice, text and data.
The FM25Q02 can be programmed 1 to 256 bytes at a time, using the Page Program instruction. It is designed to allow either single Sector/Block at a time or full chip erase operation. The FM25Q02 can be configured to protect part of the memory as the software protected mode. The device can sustain a minimum of 100K program/erase cycles on each sector or block
Features
2Mbit of Flash memory
-64 uniform sectors with 4K-byte each
-4 uniform blocks with 64K-byte each or
-8 uniform blocks with 32K-byte each
-256 bytes per programmable page
Wide Operation Range
-2.3V~3.6V single voltage supply
-Industrial temperature range
Serial Interface
-Standard SPI: CLK, CS#, DI, DO, WP#
-Dual SPI: CLK,CS#, DQ0, DQ1,WP#
-Quad SPI: CLK,CS#, DQ0, DQ1, DQ2, DQ3
-QPI: CLK,CS#,DQ0, DQ1, DQ2, DQ3
- Continuous READ mode support
- Allow true XIP(execute in place) operation
High Performance
-Max FAST_READ clock frequency: 104MHz
-Dual I/O Data transfer up to 208Mbits/s
-Quad I/O Data transfer up to 416Mbits/s
-Typical page program time: 1.5ms
-Typical sector erase time: 80ms
-Typical block erase time: 120/150ms
-Typical chip erase time: 0.6s
Low Power Consumption
- Typical standby current: 1μA
Security
-Software and hardware write protectionl
-Lockable 2X512-Byte OTP security sectors
-64-Bit Unique ID for each device⑴
-Discoverable Parameters (SFDP) Register