FM24VS64
The FM24VS64/FM24VS64R is a single 10-bit DAC with 120mA output current sink capability and has a 64Kbits EEPROM memory. DAC and EEPROM are controlled via two-wire serial interface by clock rate up to 1MHz. The device features special dynamic control mode which can minimize mechanical settling time.
The FM24VS64/FM24VS64R is designed for auto focus applications such as mobile phone cameras, digital cameras and web cameras.
Features
VCM driver for auto focus
10-bit DAC with 120mA output current sink capability
Special dynamic control mode
Embedded EEPROM
64Kbits Data memory
Lockable 32-Byte Security Sector
128-Bit Unique ID for each device
32-Byte Page Write Modes (Partial Page Writes are Allowed) two-wire serial interface
Software write protection
Self-timed Write Cycle (5ms max)
Endurance: 1,000,000 Write Cycles
Data Retention: 40 Years
Supply voltage (VDD): 2.3V to 3.6V
IO voltage (VIN): 1.8V to VDD
Fast mode (400KHz) and Fast mode plus (1MHz)
Schmitt Trigger, Filtered Inputs for Noise Suppression
Configurable device address for DAC and EEPROM
Power on reset (POR)
Thermal shutdown (TSD)
Shut down and power down mode standby current <1uA
Package: Thin 6-ball WLCSP
Applications
Mobile phone camera
Digital camera
Web camera
Lens auto camera
