ETA1043
The ETA1043 is a high efficiency synchronous step-up converter that can provide at least 100mA to a boosted output up to 14V from a low voltage source. Unlike most step-up converter, it incorporates circuits that disconnect the input from output, during shutdown, short-circuit, output current overloading, or other events when output is higher than the input. This eliminates the need for an external MOSFET and its control circuitry to disconnect the input from output, and provides robust output overload protection.
A switching frequency of 1.2MHZ minimizes solution footprint by allowing the use of tiny and low profile inductors and ceramic capacitors. An internal synchronous MOSFET provides highest efficiency and with a current mode control that is internally compensated, external parts count is reduced to minimal.
ETA1043 is in a tiny DFN2x2-8L package.
FEATURES
14V Max output voltage
Wide input range 2.5V to 6.5V
Output Disconnect
Short-circuit Protection
At least 14V/100mA Output
0.8A input current limit
Output to Input Reversed Current Protection
Up to 96% Efficiency
70μA No load IQ and light load PFM Mode
Internal Synchronous Rectifier
Current Mode control
Logic Control Shutdown and Thermal shutdown
DFN2x2-8L Package
APPLICATIONS
Wearable
OLED driver
2-4 LEDs backlight driver for small TFT LCD