FM24NC512Tx
FM24NC512Tx is a 512Kbit dual interface EEPROM with flexible tag function. The 512kbit data memory and the dedicated tag memory can be accessed by both two wire serial interface and ISO/IEC 14443A compatible RF interface. When tag memory accessed by RF interface, the device is fully compatible with NFC Forum Type 2 tag. The device can also access tag memory through the conventional address by two wire serial interface. This feature ensures a flexible NFC tag application.
Features
Contact Interface
– 1.7V~5.5Vsingle power supply
– Typical standby current <1uA
– Two wire serial interface
– 1MHz (2.5V~5.5V) and 400 kHz (1.7V~5.5V) compatibility
– Byte and Page Write (up to 128 bytes) for data memory
– Byte and Page Write (up to 16 bytes) for tag memory
– Random and Sequential read
– Contact interface timeout
RF Interface
– ISO/IEC 14443A compatible
– Contactless data transmission
– Enhanced RF performance using contact power
– Carrier frequency: 13.56 MHz
– Data transfer rate: 106/212/424/848 kbit/s
– UID & Counter ASCII Mirror for automatic serialization NDEF messages
– Originality signature
– True anticollision
– Tag operation: 4 bytes Write, 16 bytes /Fast Read
– Data Memory operation: Byte and Page Write (up to 128 bytes), Random read (up to 256 bytes)
– Support sleep mode
Memory
– Data Memory: 64K bytes organized in 512 pages of 128 bytes each
– Tag Memory:
| Part number |
Tag memory - user data |
| FM24NC512T1 |
144 bytes |
| FM24NC512T2 |
504 bytes |
| FM24NC512T3 |
888 bytes |
| FM24NC512T4 |
1884 bytes |
– Self-timed write cycle (5 ms max)
– Endurance: 1 million write cycles
– Data retention: 40 years
Security
– Write protection register of whole data memory both in two wire serial interface and RF interface
– Write protection of tag memory by page in two wire serial interface
– Password protection for lock and system configuration and RF data write
– Unique ID for each device
User configurable General purpose output
Energy harvesting and Field detection
– Configurable Energy harvesting(EH) or Field detection(FD) output
– Configurable EH output voltage: 1.5V, 1.8V，2.5V and 3.3V
– Configurable EH limited current:: 0.5mA, 1mA, 2mA and no limit
– Configurable FD output voltage: 1.5V, 1.8V，2.5V and 3.3V
– Configurable FD trigger action: upon any RF field presence, upon the selection of the tag, upon start of frame and upon halt with previous read operation
Green Package
– RoHS Compliant and Halogen-free
